Performance of High-Damping Rubber Bearings for Seismic Isolation – Case Study of Nayumi Sam Tower Malang Apartment

Ibnu Pudji Raharjo, Yuyun Tajunnisa, Indra Komara, Geralda Nurry Arifa, Sungkono Sungkono, Dicky Imam Wahyudi

Abstract


The base-isolation system is a highly effective earthquake-resistance technique. Especially when the building is under soft soil, however, it is detrimental to the horizontal displacement control of the isolation layer and less effective in decreasing the seismic response of the superstructure. Rubber bearings with high damping can produce substantial hysteretic damping and exhibit a hardening effect at high-shear strains. The research investigates the Nayumi Sam Tower Malang apartment as a case study with 10 stories of reinforced concrete with a double system structure which is in a soft soil location. High-damping rubber bearings (HDRBs) is used as a parameter study to understand the alteration and give a recommendation. The seismic response of the building is evaluated, and the HRDB alternative systems is confirmed using ETABS. It is pointed out that the HRDBs system can reduce the impact of earthquakes by close to 25% with the smallest section of structural dimension. According to new regulation building in Indonesia, the precise values of test circumstances, such as compressive force, shear displacement, and frequency, are developed. The findings are thoroughly discussed, the applicability of HRDBs for seismic isolation of residential buildings is concluded. Building with HRDBs isolation implied to have lower base shear and inter-storey drift which improved the performance of the structure with less damage.  


Keywords


High-damping rubber bearing, Numerical modelling, Residential building, Seismic isolation, Seismic provision

Full Text:

PDF

References


S. Wardi, Y. Sanada, M. Kita, J. Tanjung, and Maidiawati, “Common structural details and deficiencies in Indonesian rc buildings: Preliminary report on field investigation in Padang City, West Sumatra”, Int. J. Adv. Sci. Eng. Inf. Technol., vol. 8, no. 2, pp. 418–425, 2018, doi: 10.18517/ijaseit.8.2.4207.

K. Pribadi, D. Kusumasturi, and Rildova, “Learning from recent Indonesian earthquakes: An overview to improve structural performance”, 14th World Conf. Earthq. Eng., October 12-17 2008, p. 8, 2008.

E. Wahyuni, D. Iranata, B. Suswanto, C. B. Nurcahyo, and W. Sutrisno, “Assessment of vulnerable buildings due to earthquake loading using Rapid Visual Screening smartphone application”, Int. J. Adv. Sci. Eng. Inf. Technol., vol. 8, no. 2, pp. 567–572, 2018, doi: 10.18517/ijaseit.8.2.4336.

E. Purnomo, E. Purwanto, and A. Supriyadi, “Analisis dinamik respon spektrum menggunakan software Etabs (studi kasus: bangunan hotel di Semarang)”, Matriks Tek. Sipil, vol. 2, no. 4, pp. 569–576, 2014, [Online]. Available: https://jurnal.uns.ac.id/matriks/article/view/37351.

F. Pratama, A. S. Budi, and Wibowo, “Evaluasi Kinerja Struktur Gedung 10 Lantai Dengan Analisis Time History Pada Tinjauan Drift dan Displacement Menggunakan Software ETABS”, Matriks Tek. Sipil, vol. 1, September, pp. 378–384, 2014, [Online]. Available: http://matriks.sipil.ft.uns.ac.id/index.php/MaTekSi/article/view/22.

Soelarso, Baehaki, and F. D. Subhan, “Analisis Struktur Beton Bertulang SPRMK terhadap Beban Gempa Statik dan Dinamik dengan Peraturan SNI 1726: 2012”, J. Fondasi, vol. 4 Nomor 2, pp. 1–7, 2015, [Online]. Available: http://garuda.ristekbrin.go.id/documents/detail/545130.

A. H. Deringöl and E. M. Güneyisi, “Effect of Using High Damping Rubber Bearings for Seismic Isolation of the Buildings”, Int. J. Steel Struct., vol. 21, no. 5, pp. 1698–1722, 2021, doi: 10.1007/s13296-021-00530-w.

Z. Kanbir, G. Özdemir, and C. Alhan, “Modeling of Lead Rubber Bearings via 3D-BASIS, SAP2000, and OpenSees Considering Lead Core Heating Modeling Capabilities”, Int. J. Struct. Civ. Eng. Res., vol. 7, no. 4, pp. 294–301, 2018, doi: 10.18178/ijscer.7.4.294-301.

A. H. Deringöl and E. M. Güneyisi, “Effect of Using High Damping Rubber Bearings for Seismic Isolation of the Buildings”, Int. J. Steel Struct., vol. 21, no. 5, pp. 1698–1722, 2021, doi: 10.1007/s13296-021-00530-w.

A. Vatanshenas, T. Mori, and N. Murota, “Structural rehabilitation using high damping rubber bearing (HDRB)”, Bull. New Zeal. Soc. Earthq. Eng., vol. 54, no. 1, pp. 49–57, 2021, doi: 10.5459/bnzsee.54.1.49-57.

D. N. Grant, G. L. Fenves, and F. Auricchio, “Bridge Isolation with High-Damping rubber Bearings - Analytical Modelling and System Response”, Proc. 13th World Conf. Earthq. Eng., no. 1002, pp. 1–15, 2004.

Badan Standardisasi Nasional, ‘Sni 1726-2019’, “Tata Cara Perenc. Ketahanan Gempa Untuk Struktur Bangunan Gedung dan Non Gedung”, no. 8, p. 254, 2019.

Ministry of Public Works, Environmental and Social Management Framework. 2018.

Etabs, “Concrete Frame Design Manual ACI 318-08 / IBC 2009”, December, pp. 3–13, 2016, [Online]. Available: https://docs.csiamerica.com/manuals/etabs/Concrete Frame Design/CFD-ACI-318-08.pdf.

N. D. Oliveto, A. A. Markou, and A. Athanasiou, “Modeling of high damping rubber bearings under bidirectional shear loading”, Soil Dyn. Earthq. Eng., vol. 118, January, pp. 179–190, 2019, doi: 10.1016/j.soildyn.2018.12.017.

N. Murota, “Performance of high-damping rubber bearings for seismic isolation of residential buildings in Turkey”, Soil Dyn. Earthq. Eng., vol. 143, August 2020, pp. 106620, 2021, doi: 10.1016/j.soildyn.2021.106620.

X. Hu and Z. Zhou, “Seismic analysis of a reinforced concrete building isolated by high damping rubber bearings using deformation history integral type model”, Struct. Des. Tall Spec. Build., vol. 29, no. 18, pp. 1–13, 2020, doi: 10.1002/tal.1811.

K. A. Malek and K. B. Basir, “Design and characteristics of high damping natural rubber bearings for base isolation”, Adv. Earthq. Eng., vol. 9, pp. 155–163, 2001.




DOI: http://dx.doi.org/10.12962/j23378557.v9i3.a16233

Refbacks

  • There are currently no refbacks.


Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License. IPTEK The Journal of Engineering published by Pusat Publikasi Ilmiah, Institut Teknologi Sepuluh Nopember

 

Please contact us for order or further information at: email: iptek.joe[at]gmail.com Fax/Telp: 031 5992945. Editorial Office Address: Pusat Riset Building 6th floor, ITS Campus, Sukolilo, Surabaya 60111, Indonesia.