Automated Pet Feeder Called Smart Pakan using 3D Printer with Open Source Control System

Rizaldy Hakim Ash Shiddieqy, Bayu Adhi Saputro, Fatan Odhi Dandha, Liza - Rusdiyana

Abstract


In this paper, an automatic pet feeding machine is built using the 3D Printer machine and an opened source control system to help people with busy activities to be able to feed their pets on time. The machine is built using 3D Printer machine. The control system is built using the NodeMCU ESP8266 platform module and ultrasonic sensors. The controlling device uses a smartphone that is installed blynk application software that has the principle of the Internet of Things. The machine works by opening it’s valve to control the water’s discharge, a servo motor to open the feed container, as well as a timer to regulate the time of feeding. The valve can be set in 4 conditions. There are 10 degrees, 20 degrees, 30 degrees and up to 40 degrees. Then for the feed distance’s display it will provide information about the distance of the feed to the sensor, for a maximum distance of 9 cm in accordance with the distance sensor attached to the roof of the feed container with the sensor attached to the bottom of it. This machine can work continuously and automatically as long as there is an electricity source in the house and the owner holds the control of the blynk application software on their phone.

.


Keywords


Pets, Automatic, 3D printer, Control system, Software, Internet of things

Full Text:

PDF

References


J. Holler , V. Tisatsis, C. Mulligan, S. Karnouskos, S. Avesand, and D. Boyle, From Machine-to-Machine to the Internet of Things : Introduction to a New Age of Intellegence, Oxford: Elsevier Ltd, 2014.

L. Atzori, A. Iera, and G. Morabito, “The internet of things: A survey,” Comput. Netw. vol. 54, no. 15, pp. 2787–2805, 2010.

K. Karyono, H. T. Nugroho, and Vania, “Smart Dog Feeder Design Using Wireless Communication, MQTT and Android Client,” International Conference on Computer, Control, Informatics and its Application, vol. 16, pp. 191, 2016.

K. Seungcheon, “Smart Pet Care System Using Internet of Things,” International Journal of Smart Home, vol. 10, pp. 3, 2016.

A. TG, “hackster.io,” 25 July 2018. [Online]. Available: https://www.hackster.io/adithya-tg/control-arduino-uno-using-esp8266-wifi-module-and-blynk-app-504494. [Diakses 18 December 2020].

B. Divyah, ESP8266 : Step by Step Tutorial for ESP8266, Independently Published, 2018.

A. A. Vives, Piezoelectric Transducers and Applications, Springer, 2008.




DOI: http://dx.doi.org/10.12962/j23378557.v6i3.a7896

Refbacks

  • There are currently no refbacks.


Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License. IPTEK The Journal of Engineering published by Pusat Publikasi Ilmiah, Institut Teknologi Sepuluh Nopember. 

 

Please contact us for order or further information at: email: iptek.joe[at]gmail.com Fax/Telp: 031 5992945. Editorial Office Address: Pusat Riset Building 6th floor, ITS Campus, Sukolilo, Surabaya 60111, Indonesia.