.png)
| Issue | Title | |
| Vol 1, No 2 (2017) | Numerical Study Effect of Fluidizing Air to Erosion Pattern in Circulating Fluidized Bed Boiler | Abstract PDF |
| Bambang Sudarmanta, Rizki Mohammad Wijayanto, Giri Nugroho, Achmad Syaifudin, Atok Setiyawan, Julendra B. Ariateja | ||
| Vol 4, No 1 (2020) | Numerical Study of Airfoil Selection and Analysis of 3D Flow Phenomenon past Finite-Span Wings for Small UAVs | Abstract PDF |
| Fauzi Perdana, Sutardi Sutardi | ||
| Vol 4, No 2 (2020) | Numerical Study of Bach-bladed Savonius Wind Turbine with Varying Blade Shape Factor | Abstract PDF |
| Kelvin Ibrahim, Vivien Suphandani Djanali, Nur Ikhwan | ||
| Vol 6, No 1 (2022) | Numerical Study of Blended Winglet Geometry Variations on Unmanned Aerial Vehicle Aerodynamic Performance | Abstract PDF |
| Fungky Dyan Pertiwi, Arif Wahjudi | ||
| Vol 4, No 1 (2020) | Numerical Study of Characteristics Root Canal Irrigation using Open-Ended Needle Positive Pressure and Negative Pressure Method | Abstract PDF |
| Fajar Dwi Yudanto, Wawan Aries Widodo, Suwarno Suwarno | ||
| Vol 7, No 1 (2023) | Numerical Study of Damper Plate and Nozzle Effect on Vortex Turbine Basin for Increasing Flow Kinetic Energy Entering Turbine Rotor | Abstract PDF |
| Herman Sasongko, Wildan Alfa Rahman | ||
| Vol 6, No 1 (2022) | Numerical Study of Deflection and Stress Distribution on Composite Box Spar Structure – Application In Wind Turbine Blade | Abstract PDF |
| Putri Safina Ufaira, Putu Suwarta, Galih Bangga | ||
| Vol 5, No 1 (2021) | Numerical Study of Epoxy-Ramie Fiber Composite as a Type IV Ballistic Resistant Material | Abstract PDF |
| Sutikno Sutikno, Rayhan Fikriandry Rizal, Ahmat Safaat | ||
| Vol 4, No 2 (2020) | Numerical Study of Flow and Heat Transfer Characteristics on Flat Fin with Staggered Tube Arrangement in Transitional Turbulent Flow | Abstract PDF |
| Mahadika Favian Alfandaviska, Prabowo Prabowo | ||
| Vol 8, No 1 (2024) | Numerical Study of Heat Sink Models Mosquito Hotend on FDM 3D Printer to Determine Heat Transfer Characteristics | Abstract PDF |
| Rafi Fadhlurrohman, Bambang Arip Dwiyantoro | ||
| Vol 6, No 2 (2022) | Numerical Study of Heat Transfer Characteristics in High Pressure Steam Turbine During Stop Unit Process with Sliding Pressure | Abstract PDF |
| Budi Santoso, Bambang Arip Dwiyantoro | ||
| Vol 3, No 1 (2019) | Numerical Study of Impeller Trimming on a Centrifugal Pump Test Unit | Abstract PDF |
| R. Aurick Nugraha Prawito, Vivien Suphandani Djanali, Alif Arif Wicaksono | ||
| Vol 7, No 1 (2023) | Numerical Study of Reducer Modification with Adjuster Opening Variations on Turbine Lube Oil Pipe | Abstract PDF |
| Agus Aopik, Bambang Arip Dwiyantoro | ||
| Vol 3, No 2 (2019) | Numerical Study of Savonius Wind Turbine Rotor with Elliptic Angle Shape Variation | Abstract PDF |
| Antonius Hadi Sudono Putranto, Vivien Suphandani Djanali, Bambang Arip Dwiyantoro | ||
| Vol 1, No 2 (2017) | Numerical Study of Temperature and Air Velocity Distribution In Oil Filling Factory | Abstract PDF |
| Hernawan Novianto, Prabowo Prabowo | ||
| Vol 9, No 1 (2025) | Numerical study of the installation configuration of four Savonius hydrokinetic turbines in the cooling water channel of PAITON Power Plant | Abstract PDF |
| Oktafika Wulaningtyas, Tri Yogi Yuwono | ||
| Vol 7, No 2 (2023) | Numerical Study of Three-Dimensional Flow Characteristics in Isolation Rooms with Negative Pressure Differences | Abstract PDF |
| Wawan Aries Widodo, Satryo Fadhian Shidqi Nugroho | ||
| Vol 7, No 2 (2023) | Numerical Study of Three-Dimensional Flow in a Negative Pressure Isolation Room with One Inlet and Two Outlets Ventilation Configurations with Variations in Bed Positions and Variations in Outlets Pressure Differences | Abstract PDF |
| Wawan Aries Widodo, Rifqi Amin Muhlis | ||
| Vol 9, No 2 (2025) | Occupational Health and Safety Risk Assessment of Surabaya Pump Houses using the HIRARC (Hazard Identification, Risk Assessment, and Risk Control) Method | Abstract PDF |
| Reza Aulia Akbar, Maria Anityasari, Renaldi Jafras Arriyanto, Ignatius Dixon Melchior, Andi Candra Septaprasetya, Tri Broto Santoso | ||
| Vol 6, No 1 (2022) | Optimization Design Analysis of Boiler Blowdown Utilization on A Rotary Coal Dryer with Drum Tilt Angle Variations | Abstract PDF |
| Alvin Mizrawan Tarmizi, Bambang Arip Dwiyantoro, Aripin Gandi Marbun | ||
| 61 - 80 of 112 Items | << < 2 3 4 5 6 > >> | |
JMES The International Journal of Mechanical Engineering and Sciences by Lembaga Penelitian dan Pengabdian kepada Masyarakat (LPPM) ITS is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Based on a work at https://iptek.its.ac.id/index.php/jmes.